Naidian Weekly Programmable Timer DHC15A

Short Description:

DIN Rail Installation. Advanced pre-setting one week before. Latest technology COMS quartz Micro-controller. Digital electronics general purpose time switch with daily and weekly programs. Repeat programs with 8/16 ON/OFF settings.


Product Detail

Product Tags

DH48S Series Digital Time Relay Instruction

● Feature

● DIN Rail Installation
● Advanced pre-setting one week before
● Latest technology COMS quartz Micro-controller
● Digital electronics general purpose time switch with daily and weekly programs
● Repeat programs with 8/16 ON/OFF settings.
● To-the-minute setting accuracy.
● LCD displays real time to Hour/Minute and ON/AUTO/OFF.

● Specification

● Rated voltage: AC220V 50/60HZ (other voltage can be customized)
● Timing error ≤1s/d (at25℃)
● Contact: 1C
● Load capacity: 16A 250VAC (Resistance COS Ø=1)
● On/off operation: 8/16 ON/OFF
● Minimum interval: 1 minute
● Service life: Mechanically: 107, Electrically: 105
● Weight: Approx 150g
● Ambient temperature -10~55℃
● Display: LCD
● Battery backup: 3 years
● Power consumption: 7.5VA max.

● Dimension

152

● Operating Instruction

1. First time use this timer switch, please input AC voltage and let battery recharge after then press reset key.

2. At first time, the timer switch is in 24h mode. If you want change to 12h mode please press on " " key 5 sec and LCD will display AM If you want rechang to 24h mode, and press on " " key 5 sec to return.

3. Programming:

Step Key Programming

1 Press P Setting 1 ON time (display 1 on)
2 Press D+ Select days of week (If you want same set in every day, you need not press this key) 3 Press H+/ M+ Set hours and minutes
4 Press P Setting 1 off time (display 1 off )
5 Press D+ Select days of week (If you want same set in every day, you need not press this key) 6 Press H+/ M+ Set hours and minutes
7 Repeat step 2-6 Set 2-8 on/ off time 8** Press End
8 For cancel engagements, press “MANUAL” then “------ ” is displayed on LCD to confirm cancel.
9 May press “MANUAL” again to resume initial setting.
10 deferent mode: (1. MO 2. TU 3. WE 4. TH 5. FR 6. SA 7. SU 8. MO TU WE TH FR 9. SA SU 10. MO TU WE TH FR SA SU)
IF you need not 8 time setting press " " key to the end

4. CLOCK SETTING

(1) Press “ ” and “ D+ ” together till correct date is shown.
(2) Press “ ” and “ H+ ” together till correct hour is shown.
(3) Press “ ” and “ M+ ” together till correct min is shown.
(4) Press “ MANUAL ” key to display ON AUTO or AUTO OFF. ( If this clock in your program is ON selects ON AUTO, and this clock in your program is OFF selects AUTO OFF )

5. If you always want to use time switch ON or OFF,Please Press “ MANUAL ” key to display “ON” or “OFF”.

NOTE:

THE POWER CONSUMPTION OF CONNECTED ELECTRICAL APPLIANCES, SHALL BE WITHIN. THE LIMITATION OF FOLLOWING RATED CAPACITY

● Notice

1. Before turning power on, check that your unit conforms to the operating voltage.

2. When you buy this product, the inside battery for a long dis-charge itself, the power reserve will lower . when the inside battery completely discharge. even if connect and switch on the power source , the product still not working immediately, then please connect and switch on the power source, and wait about 10minutes before set the product present time. The full power reserve is built up after about 3 days.

3. It will keep the same program every day unless changing the program.

4. Set the setting pin to the right fully until a click is heard.

Product Application

pro_09

Production Process

pro_13

EXhibiton

pro_15

Certification

ab_certi

Packaging & Shipping

pro_19-1

  • Previous:
  • Next:

  • Write your message here and send it to us